Screw driven into the battery through hole near connectors 5 and 6.

Question

iPhone 3GS

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

joekneebone @joekneebone

평판: 1

1

게시일: 2011년 11월 2일

옵션

Screw driven into the battery through hole near connectors 5 and 6.

Hello!

I have just bought a broken iPhone off Ebay that didn't charge, that I was going to fix up and use. I have recognized the problem, though I need some suggestions to fix it.

Basically, it had already been opened, and only one thing had changed. One of the main logic board screws had been taken out, and put into the little hole near the #5 and #6 connectors, which of course, is not actually a screw hole, but instead a hole that goes straight through to the battery, which I believe has been punctured, making the phone, even now, presumably a week or two after it was punctured, quite hot. In fact, I would say the person who did it was lucky they didn't have the phone catch on fire while they were doing it, or possibly even in the plane that flew it to my city.

Anyway, I have no idea how to get it out. Any suggestions?

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 2개

Correction: The phone is no longer hot. I am not sure why it was hot when I was writing this, maybe it was because it was just after I had been trying to unscrew it.

Thanks!

joekneebone 의 2011년 11월 2일

I removed it and it had caused damage to the logic board. I shall sell it on and try again.

Thanks Luke and pollytintop!

joekneebone 의 2011년 11월 3일

댓글 달기

답변 1개

Correction: The phone is no longer hot. I am not sure why it was hot when I was writing this, maybe it was because it was just after I had been trying to unscrew it.

Thanks! — joekneebone
I removed it and it had caused damage to the logic board. I shall sell it on and try again.

Thanks Luke and pollytintop! — joekneebone

Xile @xile6414 평판: 931 8 5 1 · Answer 1 · 2011-11-02T04:30:32-07:00

가장 유용한 답변

Xile @xile6414

평판: 931

8

5

1

게시일: 2011년 11월 2일

옵션

Wow, people are weird aren't they :S

All I can really suggest is what I would try in this situation:

Open it up, disconnect everything, un-screw the board, camera etc, leave the screw in the wrong place where it is, see if it will lift up without to much pressure, if it does hopefully the screw can be poked out from the reverse side. If it won't lift, try un-screwing the bad screw with any luck it might come out.

On a 3GS I am looking at now, the screw may have just missed the battery or at least only caught a tiny portion of it.

Hope you get it sorted!

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

+ clean the phone of residue, use gloves and electronic cleaner/isopropyl alcohol. Never seen a screw puncture battery!And of course a NEW battery.

pollytintop 의 2011년 11월 2일

댓글 달기

iPhone 3GS

Screw driven into the battery through hole near connectors 5 and 6.

답변 1개

귀하의 답변을 추가하세요