주요 콘텐츠로 건너뛰기

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

183 질문 전체 보기

Why is my controller not working with my ps4 (I used it with Bluetoot

Today I just used my ps4 controller to play some mobile games on an iPad Pro… and I can’t connect it back to my ps4 even after plugging an usb cable in it and pressing the PS button. Does anyone have any idea on how to fix this?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 2개

That seems like a strange issue to occur but one thing you could do is reset it.

To reset the controller:

  1. Turn off and unplug your PS4.
  2. Locate the small reset button on the back of the controller near the L2 shoulder button.
  3. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds.
  4. Connect the controller to the PS4 using a USB cable and press the PS button.
  5. If the light bar turns blue, the controller has paired.

The small tool you can use is a SIM card tool, a paperclip, or sometimes even a ball point pen works.

Image for reset button:

Block Image

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

You can also try holding the share and PS button at the same time for a few seconds. You should see the controller’s front light flash rapidly a few times, meaning it’s ready for bluetooth pairing. It should work with usb cable though, like you did.

Do this on the start screen of the PS4, waiting for a controller. If it works it will recognise the controller by it self and the light will stop flashing.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Just found a few more questions with the same issue and looked a bit more into it. See if this video helps: https://www.youtube.com/watch?v=2-4xKWnV...

Seems you have to make sure it’s not connected to your iOS anymore

의견 추가하세요

귀하의 답변을 추가하십시오

Alessandro Salvadeo 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 13