기기를 수리하세요 커뮤니티 상점

2010년 중반기 모델 A1278 / 2.4 or 2.66 GHz Core 2 Duo 프로세서

794 질문 전체 보기

옵션

Why is my screen slipping?

Hello. I bought a 2010 MBP 13” which I have upgraded and cleaned but the screen falls backwards after a certain point and also drops on closing after a certain point. It’s just a niggle and there is no wobble or give at all in the screen. If I thought it was just a case of tightening the screws on the clutch hinge assemblies I might do it, but I’d like to be sure before I go to the bother of dismantling the screen. Any opinions? Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

The display hinges have clutches in them which over time do wear out. Best to find a good independent Mac repair person as replacing them is a bit tricky!

You need to take the display fully off to gain access to the lid hinges MacBook Pro 13" Unibody Mid 2010 Display Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 4개:

But do-able by myself as I have all the iFixit toolkit?

의

The screws are often well sealed so you need a bit of strength to not only turn but to press down so the screw driver doesn't slip. Make sure you have the correct tools as any errors could be dangerous!

의

thanks. I will order the hinges. I can't find them France but have used your link to The Book Yard. Just found them here!

의

댓글 달기

귀하의 답변을 추가하세요

Pam Dooner 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 53