주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Why won’t my iPhone charge after replacing battery and charging port?

My iPhone 5s showed no signs of life until I put in a new battery and it turned on. I tried plugging it in to the charging port but it wouldn’t charge, I replaced the port but it was after the battery had died so it is on the red battery screen. I tried plugging it in and leaving it for an hour but it still wouldn’t charge. The blank screen only shows a blinking red battery and a charger at the bottom even when it is plugged in. I have gone back a few times to make sure I have not broken anything and everything looks fine. The only other thing I think it could be is the motherboard which I have read could cause charging issues but would appreciate any help to figure out my issue.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

Have you tried changing cables? It may seem like a simple solution but many times I’ve changed entire charging ports in phones only to realise I had a faulty cable from the start. If the phone was working fine with the new battery and you’re confident the charging port isn’t the problem, the only other thing I could think of would be the cable. Make sure you’re using a genuine Apple cable if possible, and plug it in using a genuine Apple wall brick for iPhones.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I have already tried using two of my friends chargers and neither of them charged my device.

댓글 달기

귀하의 답변을 추가하세요

Frank Jr Vasquez 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 74