The port has been like this since I purchased it, but the pins were fine for about a couple of months before one pin bent, so I bent it back. Now it’s to the point where it won’t charge anymore.
좋은 질문 입니까?
평판: 2.7k
6
3
2
really for bent pins in a charger its either you carefully try to bend the pins back into position
or
replace the connector.
these are pretty decently documented so you should be able to scrounge a new connector. but there isnt much else that can be done.
good luck!
해당 답변은 도움이 되었습니까?
24 시간 전: 3
7일 전: 4
30일 전: 5
전체 시간: 51
