기기를 수리하세요 커뮤니티 상점

모델 A1200 with 2.16 또는 2.33 GHz Core 2 Duo 프로세서

113 질문 전체 보기

옵션

Tries, but why won't it power on?

Using the four LED lights by the RAM, 1st light comes on when plugged in (and will stay on until...), 2 & 3 flash when power button is pushed or held on. RAM has been ejected and reseated multiple times.

It did work once and now refuses. Early signs were computer failing during the night while asleep. Had to restart. PSU? Logic board? I'm stumped. I can't see any places where parts look bad. Replaced the watch battery, no change.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 2개

Please give us the last 3 characters of your serial number so we can verify your exact machine and better be able to help you.

의

Well, that's what I thought, but I hate to put money into it only to find out it's the logic board. Guess I will roll the dice, though, your answers confirm my thoughts.

Thanks!

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

You said LEDs 2 & 3 flash. Does 1 stay on or go out after that?

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 2개:

>You said LEDs 2 & 3 flash. Does 1 stay on or go out after that?

All three go out after that and in order to try again I must unplug and replug in the power cord, if I don't do that then no LEDs will light at all.

의

You need to replace your power supply if such is the case.

의

댓글 달기

옵션

dj - Cellers answer is right out of the book. YOU said the lights flashed, not him. Your symptoms indicate that your power supply is failing as a load gets placed on it. I would replace it

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

djmoonw 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 984