주요 콘텐츠로 건너뛰기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1199 질문 전체 보기

Keeps restarting after update

Hi, My phone got stuck on a bootloop after battery died so I restored and updated my phone to 14.7 but after this update my phone restarts every 3 min or so I read the panic log and it was thermalmonitord missing sensor mic1 error. How can I solve this problem ? I tried disconnecting every flex on motherboard but nothing seems to work.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

I just solved it by downgrading to 14.6 from 14.7 It sucks not being able to jailbreak but atleast I can use my phone now.

댓글 달기

답변 3개

가장 유용한 답변

It was bad battery all along.
The phone requires a working battery sensor to function, otherwise it can’t get battery temperature data and trips off every few minutes as precaution.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

Some say it's caused by charging port. I'm not really sure to buy which one

댓글 달기

If it shows missing sensor mic 1, it's supposed to be charging connector flex. Unless there were some additional info on the panic log which you didn't state though, that's why it pays to do a screenshot sometimes.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

There are several common reasons why an iPhone might keep restarting after an update to iOS 16.

Here are some common causes:

  1. Force restart your iPhone
  2. Update the software on your iPhone
  3. Remove the SIM Card and reinsert it
  4. Determine if an app is causing your iPhone to restart
  5. Delete all outdated apps
  6. Update all apps
  7. Clean up your iPhone
  8. Reset all settings
  9. Check for a hardware problem
  10. Restore your iPhone as new

Read the following blog for more information:

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Kuzey 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 116