주요 콘텐츠로 건너뛰기

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1046 질문 전체 보기

Distortion on earpiece after replacing screen

I’ve recently replaced a broken screen on my iPhone SE (2016), the replacement is not an official iPhone screen but from an observational point of view and according to the website, it is of high quality.

However, ever since I installed it, the earpiece of my phone sounds distorted, not only to myself but also to whoever I am on the phone to, which makes me think that the distortion is affecting my phones noice cancellation.

I suspect that when I re-attached the earpiece I may have fixed the screws too tightly, and in doing so, preventing the small springs that are attached to the earpiece from absorbing enough vibration to prevent the distortion.

Any thoughts over what can cause this problem would be very much appreciated, thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

As you said, this is likely due to the installation of the earpiece speaker and front sensor flex assembly. Should be easy enough to open up the device and remove the shield over the speaker. Make sure all the sensors are aligned and everything fits well(eg. no force required for it to be flush with screen), and then put the shield back on, not too tightly.
Turn it back on and give it another test and see if anything has changed. Typically if the speaker is making even some noise, that means it isn’t broken and may just need to be cleaned or aligned properly. Also make sure the speaker grille is clear and clean, although that shouldn’t be an issue on a new screen.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Thank you so much for a very detailed answer.

댓글 달기

귀하의 답변을 추가하세요

Gareth S. 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 6

30일 전: 39

전체 시간: 1,092