주요 콘텐츠로 건너뛰기

2017년 9월 22일 출시. Model A1863, A1905. GSM 또는 CDMA / 64 또는 256 GB / 금색, 은색 및 스페이스 그레이.

869 질문 전체 보기

iPhone 8 in Boot Loop after Screen Replacement

I have repaired many iPhone successfully over the past few years, but last week I began a repair on an iPhone 8 and accidentally severed all the flex cables from the screen (camera, LCD and home button) when trying to remove the screen. Today, my replacement front-facing camera arrived so I proceeded with the repair. All went well except when I accidentally connected the front camera flex cable upside down and attempted to power on the phone. I realised my mistake and corrected it, and now the phone goes into a boot loop when connected to a charger.

Firstly, does anybody know which of my two mistakes may have caused this (or if there are other possibilities as to what might have done it)?

Secondly, what can I do to fix it? I don’t have high hopes but any help would be hugely appreciated!!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

I actually found the problem… broken proximity sensor in the new camera assembly! As soon as I unplugged the camera flex everything booted up fine. New camera assembly on the way ?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

iPhone in boot loop when charger connected after screen replacement

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

TheRe 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 11

30일 전: 29

전체 시간: 1,225