기기를 수리하세요 커뮤니티 상점

듀얼 마이크와 802.11ac Wi-Fi 연결 기능을 갖춘 Apple MacBook Air 중 더 작은 노트북.

149 질문 전체 보기

옵션

I have the black screen of death

I initially did an erase and install with disk utility and the computer booted up fine.

The next day I got the blinking question mark in the folder at start up. I restarted and since then I’ve got nothing but the black screen.

I have tried to boot in recovery (command R) I have gone through the NVRAM and PRAM reset protocols. Nothing.

I have created a bootable thumb drive with Mojave on it and tried to boot to the thumb drive. Nothing.

I don’t know what OS is on the device. It may have been High Sierra. I have a new drive, not installed yet, and can make a bootable drive with High Sierra on it. Can any one assist with some step by step instructions as to what can be tried next?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

I think you need to go back one more version as High Sierra is the first release of APFS. You should create a bootable OS installer with Sierra as that’s the last HFS+ release. The systems firmware likely didn’t get updated so it has no idea how to boot up under anything else but HFS+

OK, here’s a link to the older OS versions How to get old versions of macOS Download the Sierra installer

Now format a 32GB Thumb drive with GUID and a journaled file system using your working Mac. Then follow this guide to create the bootable Image How to create a bootable macOS Sierra installer drive

Now give that a try!

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Matthew Agostinelli 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 21