주요 콘텐츠로 건너뛰기

듀얼 마이크와 802.11ac Wi-Fi 연결 기능을 갖춘 Apple MacBook Air 중 더 작은 노트북.

149 질문 전체 보기

Black Screen after SSD upgrade

I recently changed the SSD in my macbook air. All installed accorndingly and also recovered from Time Machine.

Problem:
Computer is on
I close it’s screen
When I open it again, the screen remains black.. it’s almost gray, since there is some light on it.. it’s not “turned off” black.

Then the only way to go to the main screen again it by powering it of and starting it again. When doing this I get the message that my computer had a problem and was shut down..

Is it a configuration or can it be a problem with the SSD? It’s a chinese brand SSD.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

What SSD did you use? Make & Model

INDMEM

Model: DMPG3N - 256Gb

댓글 달기

답변 1개

Sorry I have no history with this drive.

It does appear to match up with the custom Apple interface from the photos. The information I found implies it has a PCIe x 8 which is not possible in this system (typo?). Either you got a bad unit or they failed to mimic Apples interface correctly.

Other than sticking with the custom Apple SSD’s, I would recommend sticking to either OWC or Transcend as they both make compatible drives. One important detail is your system needs to be running High Sierra or newer as Apple altered the OS for both of these vendors to offer compatible drives (under license).

Review this great guide The Ultimate Guide to Apple’s Proprietary SSDs for the full lowdown on Apples SSD’s.

What happens when you put the original SSD back in?

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

I did not try to put the original back.. Will do it now.

Its strange, because other than that this new ssd is working "ok".. A little bit slow, but is doing the job.

will check what happens with the OG drive and comment here again

@Bruno Seibert - Any news?

댓글 달기

귀하의 답변을 추가하세요

Bruno Seibert 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 74