평판: 11
1
I replaced my battery a second time after the first stopped charging at all. The second battery only seems to charge once it has run out completely and not while plugged in and being used - I have attached a coconutBattery screenshot. Any ideas?
I have updated to Monterey to see if it helps. Here is the current info:
좋은 질문 입니까?
평판: 478.9k
35
329
970
You have a threshold issue within the charging control logic. Sadly that’s part of the logic board that needs service.
You might want to try the other side ports a try to see if thats better as your system has two Intel JHL6540 Thunderbolt 3 controllers (light Blue marked chips)
Otherwise its within the SMC logic which you could have hit while disconnecting the battery (light Green marked chip)
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 50
댓글 1개
Thank you. I guess there’s not much I can do about that. ☹️
Jonathan B 의