주요 콘텐츠로 건너뛰기

Released in May 2020, the 13" MacBook Pro features quad-core Intel 8th generation Core i5 and i7 processors, and Intel Iris Plus 645 integrated graphics. (Model A2289/EMC3456 with two Thunderbolt 3 ports)

75 질문 전체 보기

Weird display issue after a fall

I have a MacBook which had a fall but the display isn’t broken just get a weird glitch every now and then, I was wondering if reseating the display cable could help or if the display is damaged beyond any repair

Block Image

when I flex the display a little it goes away and works just fine for a while even closing and opening the display.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

To make sure connect your system to an external display if the externals image is good when your internal is messing up then you have a problem with the internal display.

댓글 달기

답변 1개

Not good ;-{

You’ll need to find someone with very good micro-soldering skills to see if they can save your display.

What you are seeing is the LCD displays ribbon cables to the T-CON board have become disconnected. Hopefully its just the solder joint on the T-CON board then its the T-CON board which is part of the display assembly.

Block Image

Otherwise its time for a new display time:

  • 13” MacBook Pro Complete Display - Space Grey, Apple P/N 661-15732
  • 13” MacBook Pro Complete Display - Silver, Apple P/N 661-15733

MacBook Pro 13" Two Thunderbolt Ports 2020 디스플레이 어셈블리 교체

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

I see, apple quoted me an estimate of $600, If I were to mail this laptop to Rossman repair group do you think it would be less expensive, or how much would a repair like that cost approximately ?

@Manuel Alejandro Roman Leal - You'll need to talk directly with them. There still a good possibility you may still end up needing a new display if they can't fix it.

댓글 달기

귀하의 답변을 추가하세요

Manuel Alejandro Roman Leal 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 40