주요 콘텐츠로 건너뛰기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1196 질문 전체 보기

Touch stops working when screen is snapped into place

The touch on my iPhone X screen only works when the pentalobe screws are removed and the screen is lifted. When the screen is snapped back into place, the touch ceases to work. Display is fine regardless. Any idea as to what may be the cause and the repair are greatly appreciated.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

So this can be a few things.

  1. Your board is a sand which board which has a interposer. Interposer is the middle section of the motherboard that connects the top and bottom together. This model is famous for getting pulled or weak pads on that interposer. With and without pressure will cause the touch to have issues.
  2. Make sure that all debris is out of the way on the frame when installing. Also look and see if you see anything that could be applying pressure to the back of the screen when installing.
  3. You have crimped the flex cable of the screen and with movement it works or doesn’t work. Try a replacement screen that is known working screen to see if it does the same thing.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Edward Smith 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 15