주요 콘텐츠로 건너뛰기

The PlayStation 3 Slim is the second version of the PS3 video game console with the original model number CECH-2000. Produced by Sony Computer Entertainment it fixed many issues of the original (fat) Playstation 3. It was released on September 1, 2009.

462 질문 전체 보기

CECH-2101B only reads dual-layer Blu-Rays when held vertically?

Basically the problem is this: I can load most PS3 games into my CECH-2101B PS3 and they start up just fine. However BD movies and PS3 games that are dual-layer (aside from GTA5 for some reason) do not unless I physically lift the console and hold it vertically (with the disc drive pointing upwards).

Is this a laser issue and can I fix it by swapping the laser?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

It just needed a new laser. Done and done.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

This is very similar to the problem that a lot of PS2s (Primarily Slims) had where they would only read certain discs unless the console was in a certain position. The fix for those was a new laser, so based on the symptoms you have provided, we can safely assume it’s the laser. One thing I would check though is to make sure it actually spins properly if it does, then I would try the laser. If it doesn’t, then there’s a problem with the drive and it would probably have to be replaced. Here is a guide on how to remove the drive from the console to replace the laser or the drive itself: PlayStation 3 Slim Blu-ray Disc Drive Replacement

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

It definitely spins correctly because I can feel it while I'm holding it up (I can even feel it reengaging after it gives up the first time). Plus, as I mentioned I can read single-layer Blu-Rays (meaning the BD laser itself is alive) and CDs/DVDs.

댓글 달기

귀하의 답변을 추가하세요

SolidSonicTH 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 15

전체 시간: 391