평판: 13
1
It’s a model # M5011 and when turning on the computer gives a normal boot tone and the hard drive is working but the screen is white with white lines. All capacitors on the motherboard were replaced and cleaned. It came with the ROM and all RAM slots filled.
Update: I have replaced both the Q1(2N3904) ic and U1(74LS38) ic no changes occurred.
좋은 질문 입니까?
평판: 36.9k
150
91
50
The fact that you're getting a chime (and not a "chime of death") should indicate that the ROM and RAM chips are okay, but you could remove some of the RAM to rule out the possibility of a bad stick that isn't getting caught during the startup check.
Display issues on these machines can usually be attributed to the analog board, how to the capacitors, connections, and other chips look on that?
해당 답변은 도움이 되었습니까?
The RAM strips are using tin connectors. Clean those since corrosion can cause all kinds of errors.
24 시간 전: 1
7일 전: 1
30일 전: 5
전체 시간: 448
댓글 2개
The battery on the logic board was replaced, correct?
Andrew S 의
yes the battery was replaced before the caps were.
Codedream 의