주요 콘텐츠로 건너뛰기

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

Lid won't fit after replacing battery

We have the Late 2008 (7th Gen) 160gb version. We installed the correct ifixit battery thick, as only devices from 2009 are thin.

However, when putting the housing together it will not go all the way down at the top.

Anyone else ran into this?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

It looks like you got a battery for the 160gb thick model from 2007 (6th gen), and yours might be 2009 model (7th gen) is slimmer. You need to check which model you have by pasting your iPod's serial number on this site: http://www.chipmunk.nl/klantenservice/ap.... It'll show you info about your iPod's production date and generation, from which you can tell which model is it.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

bpatel 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 10

전체 시간: 48