TV won't register any ports at all. Channel 3 just Fuzz

Question

Sanyo Television

Repair guides and support for your Sanyo TV.

360 질문 전체 보기

Pamela Haymond @pamelahaymond

평판: 13

1

게시일: 2022년 4월 15일

옵션

TV won't register any ports at all. Channel 3 just Fuzz

I have a Sanyo DP26640. When I go to input all ports are checked but nothing I plug in to the TV will show on the screen except the old manual antenna. That picks up local stations just fine. I have a ROKU stick that was working plugged in to HDMI 1 but now I get nothing. Does the channel still have to be on 3? I tried a different ROKU that works elsewhere, I tried plugging in to different HDMI ports. Help!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

bill @ruggb 평판: 4k 3 3 · Answer 1 · 2022-04-15T19:00:42-07:00

bill @ruggb

평판: 4k

3

게시일: 2022년 4월 15일

옵션

Ch 3 is only for things plugged into the ANT jack. Any port inputs like HDMI must be selected as an input. That is what the INPUT button on the remote does (sometimes labeled as something else). The fact that they are all checked on your setup only means that they are available as inputs, but you must select one. Hitting the channel button usually reverts the input to ANT. The Roku I have will cause the TV to change to the HDMI input if I hit any button on the Roku remote. Not all do that so you must change the input to the HDMI port the Roku is connected to.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

Sanyo Television

TV won't register any ports at all. Channel 3 just Fuzz

답변 1개

귀하의 답변을 추가하세요