기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

옵션

iPhone 6 main speaker doesn't work after complete reassembly

Hello. I completly disassembled and assembled my iPhone 6, speaker was working normally, after assembly everything is working normally bud i don't get sound from the speaker. Volume doesn't say headphones so it is not stuck in that mode and i checked resistance on speaker and on the flex cable, both are the same, port looks fine under microscope, is there a possibility that a screw somewhere is different and that can be causing that problem? Thanks in advance

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Hi

I suggest you clean the speaker contacts with isopropyl alcohol to speak away any dirt our human eyes can’t see

If this doesn’t work try holding the speaker contacts down to make sure it’s not a contact issue

Hopefully this helps

Any questions please ask

Thanks:-)

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 8개:

Haven’t got one of the antenna wires caught under the speaker have you? Stupid question, mute switch on?

의

Thanks for your answer. I did both steps, but sadly it didn’t work. For a short while it was stuck in a headphone mode but when i tried to call and put it on loud speaker, no sound was played. Now im back when it says normal volume but still, doesn’t work.

의

@aricius

Try taking the logicboard out and assembling it without the screw and manually hold the speaker down to make sure there is proper contact :-)

의

@strongbow Hello, antenna wire is not stuck under the speaker, for testing i disconnected it completly and mute is off.

의

댓글 3개 더보기

댓글 달기

귀하의 답변을 추가하세요

Patrik Mesaroš 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 50