기기를 수리하세요 커뮤니티 상점

모델 A1502 / 4MB 공유 L3 캐시 2.6 GHz (Turbo Boost 최대 3.1 GHz) 또는 2.8 GHz (Turbo Boost 최대 3.3 GHz) 듀얼-코어 Intel Core i7 프로세서.

494 질문 전체 보기

옵션

mac won't turn on or charge

hey,

I have change my battery six month ago with a iFixit kit. Everything was going well.

I am in holiday in the Caribbean, when I plugged the charger the first time (It was running out of battery), I had a very short (0,2s) green light on the Magsafe, then it stopped.

And since my mac won't charge at all (no light), I tried the different NVRAM and SMC, with an other Magsafe charger (a friend have exactly the same mac and doesn't have any problem...) - nothing.

I really don't know what to do now. Asking myself if it's a short-circuit that damaged the battery cause of the voltage difference ? Or just that my mac died on me randomly. Am pretty desperate right now because I have all my work on it.

Please, help me :)

Thanks in advance for your advise !

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

So the MagSafe LED just goes out? Or did it go Amber.

의

It lit just once very shortly, then nothing since !

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@jeanlecerf Unfortunately, you most likely have a bad battery (even iFixit isn’t immune to manufacturing defects). There is a known issue with the chips on the batteries board, that either needs replacing (NOT a DIY job) or a replacement battery. I had the exact same issue with a battery for a 2013 MB Air (not purchased from iFixit).

Get in contact with iFixit support about the problem. They’ll take excellent care of you :)

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 3개:

Thanks for your answer ! How did you do then with your MB ? Changed the battery?

의

@jeanlecerf I luckily hadn’t recycled the original battery, which was still OK-ish, so I put that back and everything was A-OK again. The supplier was out of stock on the battery, so I’m still waiting for the replacement.

의

Thanks you very much. I still also have my original one. I'll try when am back home. Fingers crossed !

의

댓글 달기

옵션

Try disconnecting the battery from the logic board and MagSafe. Press and hold the Power Button for 15 seconds. Reconnect the battery, the the MagSafe, you should get a spontaneous restart.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thanks. But just tried and nothing new...

의

댓글 달기

귀하의 답변을 추가하세요

jeannotparis 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 106