기기를 수리하세요 커뮤니티 상점

{A1706 / EMC3214}—2018년 7월 출시, 이 MacBook Pro 13”는 쿼드-코어 i5 및 i7 프로세서 그리고 Intel Iris Plus 통합 그래픽 포함.

202 질문 전체 보기

옵션

After flooding, it's unclear what's going on

Hello, maybe here I can find help :D

(If I can fix it will be mine, I got it after about a month after flooding)

Laptop after flooding, I checked the motherboard and it looks clean. Only at the air outlets you can see liquid and the keyboard smells like coffee :D

100% screen and touchbar does not work

Laptop on battery alone does not boot from the button, you have to plug in the power adapter. When the power adapter unplugs it still works.

First boot with power supply plugged in - chime can be heard, keyboard lights up

Second startup - same as first startup

Third startup - Keyboard has no backlight, no chime, only the sound of plugging in the power adapter can be heard

Fourth startup - nothing, starts up (fans spin normally) runs with a few seconds (fans go into high speed) and the laptop shuts down

I disassembled the laptop and with the help of boardview (board 820-00850-A) I checked the voltages and if any components are shorted (I'm a beginner and don't know too much about checking motherboard components)

I checked all the fuses and they are OK

The only thing I noticed is L7430, L7420, L7410 are shorted, L7210 and L7220 are around 0.9 V

Could it be that the CPU is dead? As if anyone would like to help, please write which components to check with a meter at power on (Today I will no longer be able to check and respond to answers. Tomorrow around 10-11 PM GMT+1, I will be able to check it)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Those particular inductors are all part of CPU power, and if by shorted, you mean you're getting low resistance to ground, then that's normal. CPU and GPU power lines are generally very low resistance lines and have a low operating voltage, so I would say that's normal. .

This sounds mostly like it might be a display problem. If FileVault is enabled, it is normal for the machine to be less responsive after the third boot. This is generally when it thinks you've forgotten the password and boots into recovery for attempted password reset. That's a bit educated guess on my part, but I would try connecting an external display. I might also try unplugging the Mac display from the motherboard to force it to output to the external.

What were the circumstances of the spill? Where did liquid actually go when it occurred. This can help determine was parts may have been damaged.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 3개:

I received this laptop before yesterday, it was flooded maybe a month ago. I have no idea if FileVault was turned on. I can definitely smell coffee on the keyboard, you can see marks at the air outlets and on the screen tape - probably the screen and touchbar got a short circuit.

I forgot to add that I unplugged the matrix and checked if the laptop was giving an image via the usb-c to HDMI adapter. The laptop gave a picture but reset itself. Whereas now it doesn't give image to external monitor and as I wrote earlier: starts up (fans spin normally) runs with a few seconds (fans go into high speed) and the laptop shuts down.

의

As it gave the image on the adapter it displayed only the apple and nothing else. And now completely nothing

의

I created a bootable flash drive with the system. Unfortunately, despite holding the command button (and even holding alt on the usb keyboard) the laptop keeps rebooting without giving an image to the external monitor

의

댓글 달기

귀하의 답변을 추가하세요

BATTLEKITEN 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 2

30일 전: 11

전체 시간: 76