기기를 수리하세요 커뮤니티 상점

The GameCube is Nintendo's fourth console gaming system. Repair is simple and requires only common tools.

91 질문 전체 보기

옵션

Disks won't spin after replacing the laser

I just replaced the laser in an old gc, and it's moving, but the disk isn't spinning up. Not sure if that was already happening or if it's a new problem though. What can I try now?

Block Image

Update: took it apart again to check for that solder ball, and now the disc spins, but the laser doesn't turn on

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

@sadmango, Did you remove the solder ball all lasers are supposed to be shipped with to make it transport safe?

의

no, i didn't know there was one

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Go back over the connections you disconnected and make sure they are all connected correctly.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

Did you get rid of the solder that you need to take off?

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 3개:

I don't think there was any. I'll add a pic in case it's just me being dumb

의

@sadmango That cable looks burnt?

의

댓글 달기

귀하의 답변을 추가하세요

just some mango 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 99