주요 콘텐츠로 건너뛰기

Smaller brother of 300 in 6cy coupe.

2 질문 전체 보기

While car in d, car doesn't move, and rpm raise

When I put gear in drive, the car doesn't move and the rpm meter goes up

Update (01/29/2023)

While in reverse, it work but d-1 and 2, no. Rpm meter raises when I accelerate. Year of car is 2014 chryselor 200.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

@cudang how about R and 1 and 2? What year is yours?

Reverse work, but d1 and 2 doesn’t. And the year is 2014 chryselor 200

댓글 달기

답변 1개

Chrysler is somewhat prone to bad transmissions, and this is usually one of the symptoms of a bad tranny with them. However, this is NOT cheap so you do want to do a proper diagnosis.

What I would look at first is the range sensor and see if there's an issue with one of the solenoids first, but this usually requires a high end scan tool like an Autel used by a mechanic unless you can find one for $150-200 (maybe $250) with manufacturer specific diagnostic testing. Try something like this: INNOVA-CarScan-Pro-5210, othwerwise you will need a scan tool like this: FOXWELL NT624

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Danny 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 15

전체 시간: 140