평판: 35
3
Hi everyone!
I'm looking for the kind of double-sided tape on the gold part on the back of the Lightning connector. I think that golden part needs to somehow stay in contact with the housing.
Does anyone know what type of tape is used?
Thanks in advance.
좋은 질문 입니까?
평판: 541
9
8
13
Once fitted the loud speaker will hold it down so I wouldn’t worry about it.
해당 답변은 도움이 되었습니까?
Thanks for the answer. But unfortunately, part of the tape doesn't stick anymore and the iPhone stopped working the speaker and doesn't charge anymore.
I bought another piece.
평판: 57.1k
123
42
89
Hi sidneijunior,
I was in the same position with an iPhone X I was working on; I felt like there was probably a reason for the conductive adhesive used on the lighting connector flex, so I went looking for a replacement as well.
I didn't really find any sort of double-sided tape like you're describing, so I ended up with a liquid conductive adhesive that came in syringes. I just squeezed out a little bit and spread it over the area of the flex that was originally glued. Seemed to work; so far so good!
해당 답변은 도움이 되었습니까?
Thank you for the answer!
I bought another piece, but I solved part of the problem using aluminum foil, the speaker doesn't work, but the iPhone back to charge again.
It’s not the adhesive it’s either your speaker or you need a new charge port assembly. I have removed loads of ports and transplanted them into other phones with no issues.
@sidneijunior, when you say you bought another piece, what exactly are you referring to? I'm with Nigel in believing you probably need a new lightning port assembly since that's the common point between charging and the speaker.
How exactly did you fix the charging problem with aluminum foil? I'm curious...
@dadibrokeit I bought the whole set that I sent in the photo, in the parts that have the stickers, I made some folds with the aluminum foil with the exact size, so the iPhone started charging again.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 62
