주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기
질문 마감됨

error 40 itunes restore

While trying to restore my iphone i get error code 40. i have an iphone 3, ipad firmware, ios 4.2.1. already tried dfu mode. currently i'm stuck in recovery. already tried tiny umbrella and ireb. Any suggestions?

Update

ok my iphone is stuck in a recovery loop right now. i tried kicking it out with tiny umbrella, ireb and irecovery. so i just thaught restoring it would do the trick. yet i get error 40.

Update

many said that it was a sn0wbreeze hacktivation error. so you should download sn0wbreeze 2.0.2, which i did and create a custom iswp. then put your iPhone in dfu mode and restore with iTunes. i did these steps but i get error 1601 while restoring. i know its not the usb nor the wire because i tried it on another iPhone and it worked. also when i try restoring with a different ios it starts the process then gives me the error 40 again.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Error 40

how do i fix it please help

댓글 달기

답변 6개

가장 유용한 답변

What are you trying to achieve? An update of your IOS, a restore, or an unlock?

Error 40 indicates a "Hacktivation" bug in an early Sn0wbreeze release version 2.0.1. If yes then it was fixed in 2.0.2.

If you are attempting to restore, have you tried using iReb, either as a standalone app or within Sn0wbreeze or Redsn0w to put your phone into a Pwned state for itunes?

Direct link to iReb r5 (New Version)

http://downloads.ih8sn0w.com/iREB-r5.zip

Have you made changes to your HOSTS file? If yes, did you make it "Read Only" after change?

Let Tiny Umbrella put your phone into Recovery mode instead of DFU. It will display this on screen.

Block Image

I hope this gives you some direction.

Or have a look at this link for future iTunes error solutions. It is a more concise source for the "TRUE" meaning of all iTunes errors.

http://theiphonewiki.com/wiki/index.php?...

Just update your phone to the latest IOS 5.0.1 now before apple release 5.1. Jailbreaking has been solved for all iPhones and iPads.

Update

Good you have made progress, don't give up now. Error 1601 is caused when iTunes recognizes a customised IPSW file. So what you need to perform first is while your phone is in DFU mode and connected to your PC run iREB-r4

Download from here

http://dl.dropbox.com/u/55495998/iREB-r4...

once run press the corresponding button for your phone. So you would press 3G,

Block Image

and then iREB will put your phone into a PWNED state. You should see the same screens as in my screenshots below. The only difference is that I was using my iPhone 4 and you have a 3G.

Block Image

Block Image

This will make "decieve" iTunes into allowing the installation of a modified IPSW.

If iTunes throws the same error, then run iREB again.

Good luck.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

I have a 3GS and i tried restoring, but i always get error 40. iPhoneWiki database is out of date for error 40. Some one help!

~musicguy294

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

Did you try the above answer?

Same problem here.

yep 3Gs is not meant for iPhone 5.1.1. Crash-city since I upgraded.

댓글 달기

Por favor me ajudem , não restaura de jeito nenhum da erro 40 ;

O que eu faço ?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Desculpe-me, mas técnico da Apple disseram-me que o 3GS não se destina a pega 5.1.1 upgrade. Também OI6 upgrade, você deve aguardar dois meses. Meu amigo que trabalha na Apple disse-me isto. Erro 40: 3GS está tendo problemas com 5.1.1 software

Desculpe para o português ruim.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

smash it on floor realy hard worked 4 me felt much better

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

hey i plz help to fix 3gs.. i always getting error 40 while restoring.. i did every thing like itunes update host file is in original state .. and i m restoring 3gs on latest version 6.1.6 but always getting error 40.. also no antivirus and firewall active.. i know this is a hardware issue because i change the dock connector with my old iphone 3gs dock connector.. then when i start iphone , its automatically put in restore mode.. and now i always getting 40 error when restoring.. plz help (i replace dock connector for no reason, i was just checking that if it is ok or not but now i know that it was not good , now i replaced with original once but still getting error).. sorry for my bad english

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 41,072