주요 콘텐츠로 건너뛰기

2011년 7월 21일에 출시되었습니다. Core i5 또는 Core i7 프로세서. Thunderbolt. 이 기기는 Mac mini Server 구성을 실행하는데도 사용됩니다.

203 질문 전체 보기

Dual hard drive installation issue with connector cable.

I'm trying to install a second hard drive in my mac mini and I am having a few issues getting things to fit. I think the connector cable that came with the ifixit kit may be too short or too long (depending on if I route it between or above the second hd.) I can force it to connect if I route the connector cable between the drives, however can't seem to line the antenna plate afterwards or close the machine up. The guide is very helpful - however becomes vague at towards the end re: how and where the second drive should fit. Does anyone have any tips or guidance?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 1개

선택된 답변

Can you physically put the cover back on without installing the cable at all (with the antenna plate in place)? if not you may have too big a drive (height).

I'm assuming you have the 2011 version Mac Mini

The ribbon cable is sandwiched between the HD's just in the corner as it then routes up to the main logic bd.

See Step29 3rd image: Installing Mac mini Mid 2011 Dual Hard Drive Kit

The ribbon cable should just make it without any excessive slack. The primary drive should be resting flat just above the 2nd HD.

See step 18: Installing Mac mini Mid 2011 Dual Hard Drive Kit

I suspect the 2nd drive below the primary drive is too big and is forcing the primary drive up preventing you to close the case. If you can get your hands on a Dial Caliper (metric) you could measure the height of the two drives. Your new drive should be no bigger than the Apple drive. Millimeters count here!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

johneadams 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 907