기기를 수리하세요 커뮤니티 상점

Model A1288 / 8, 16, or 32 GB capacity

451 질문 전체 보기

옵션

Home button not working: found the problem but can't solve it

I cracked my iPod Touch 2G screen, so I decided to buy a new digitizer. I installed it without problems, right tools etc. When I completed the replacement, I found out my home button wasn't working anymore. After houres of trying and searching, I slapped my face when I found out what was wrong. On this picture:

http://imageshack.us/photo/my-images/19/...

you can see what part I'm missing. It's a tiny golden spring, responsible for the home button. Reason I slapped my face: I actually saw that part on my desk, didn't think it was anything important and threw it away. There is no way of retrieving it. So, thanks to this, my 280€ iPod is not working, also stuck on white screen of death, all because of a liiitle gold spring.

My question: can I fix this? Can I replace this part?

Anyone who can help: Thank you very, very much.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I answered a question just like this today, but I post it again here for you and for better searching for anyone else with problem.

Home button spring can be purchased on Ebay for $9.99

Home Button Spring for iPod Touch 2nd/3rd Generation

That was the only place I found that sells it.

The diagram for the home button is like this: http://imageshack.us/photo/my-images/215... In that image when the digitizer is in place 1 and 2 are in contact with each other and 3 and 4 are in contact with each other. The button just completes the final connection.

If you don't want to pay $9.99 then you can just solder a thin wire between pad 3 and pad 4... that's really all the spring is doing (connecting 3 and 4). The home button when pressed will make the final contact.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Tijs 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 707