Flickering backlight after Inverter change

Thank you for posting your question. Your problem is slightly different than the other one, insofar as your backlight does not blackout. The CCFL bulb is very similar to a Florescent bulb. They have the same principles behind how they work, though one works at high voltage and the other at low voltage. As you have properly diagnosed the problem is heat related. With your symptoms - 99% chance the problem is the CCFL bulb. The mercury vapor in it needs heated up to react (exchange ions) with the phosphor coating on the glass. The chances are you can hear a low humming sound near the bottom part of the bezel during this time. The other 1% is the capacitor from the tank circuit leading to ground is the component that needs time with electricity applied to it to fully charge.

The suggested repair is one that involves replacing the CCFL bulb. Most people option to replace the entire LCD to do this. Click here, for a vendor that sells the LCD, new, for $79 in the US and $110USD world wide. That price includes shipping. A used LCD will be less. The last used LCD I purchased for this model was $50USD, about a year ago and the new one was twice the price I have given you, at that time. Had the price for the new one been what it is today, I would have purchased the new. Click here, and look under LCD Panel for instructions on how to replace it. The CCFL bulb is sold and can be replaced independently, but most people feel it is beyond their abilities. Since you have not inquired about this, I won't add the details for that repair option.