Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1501 질문 전체 보기

iPhone won't turn on after replacing battery

How's it going there guys?

Recently attempted to replace the back cover on my iphone 3g and Decided to replace the battery at the same time.

Order the wrong battery by mistake, one for a 3gs.

Put the battery in a sealed up the phone and gave it a fully charge , the phone turned on a ran fine for about 12 hour until it became unresponsive and turned off.

Now it won't turn on even when connected to mains or computers .

Any ideas on what has happened ?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

The charging input on the batteries are different,it may fit but that's about all.. swap the old battery back in and see what happens.

해당 답변은 도움이 되었습니까?

점수 2


The old battery is now somewhere in a land fill.

Are there anyways of checking if the logic board is ok with a set of phase testers?

Before i order up the correct battery.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

ocking1 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 366