Why won't my vacuum turn on?
Oreck won't turn on and handle power switch doesn't illuminate.
좋은 질문입니까?
점수
1
827210
답변 1개
선택된 해법
평판: 206
7
6
The electrical connector to the switch itself may be disconnected inside the handle.
- After the obvious try a different outlet, verify the cord is plugged in both ends.
- The connections to the illuminated switch in the handle are pressed on. After repeated dropping of the handle onto the floor, a switch connector may have fallen off the switch.
- Unplug the unit and remove the screws holding the two sides of the handle together. Locate the loose wire and plug it back into the switch lug.
- Loosely assemble the handle, plug in the vac and give it a try. If it turns on tighten the screws.
이 답변이 도움이 되었나요?
점수
1
