Why doesn't my factory amp and sub work after I replaced my stereo
Why won't my factory sub and amp work after I replace my stereo with an aftermarket pioneer double din stereo
좋은 질문 입니까?
점수
0
829178
답변 1개
평판: 847
7
1
Greetings,
What year is your vehicle so I can pull up a radio schematic. It is likely you have connected something wrong.
- Did you purchase a harness connector or did you simply try to splice the new unit in?
- Is the remote wire usually a blue wire with a white stripe connected to the proper wire on the factory harness side to send a signal to the factory amp to turn on when the radio is powered on. The blue wire on the aftermarket harness is connected to the orange w/ blue stripe on the factory harness in some of these years.
- without a car year, I am pretty limited to what help I can give you.
Cheers!!
Monte
해당 답변은 도움이 되었습니까?
점수
0
