주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Home button is not working

I dropped my iPhone 3G after 3 years of (hard) use, this cracked the glass. I then got a new 3GS, and used the old 3G as an alarm clock. One night I reached out for a glass of water and knocked it over. The next morning the 3G was making crackling noises, so I dried it out but she was dead, Jim.

So it lay on my desk for some months. Then I decided I would fix it. I got the new front cover and glass, (no home button) and also new docking electronics. Replacing these went smooth as advertised.

So when I charged it and switched it on, I was happy to see that everything seemed ot be working....except the home button. Nothing. Press hard, sideways, up down, nothing nothing nothing.

So I said some words, ordered ANOTHER front screen assembly this time with the new home button and plastic and stuff. Installed it no problem, but....exactly the same problem. Home button she dead, dead, dead.

Any help, much appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

Seems to me as though the Logic Board has suffered corrosion via liquid damage. The annoying thing about liquid damage is that sometimes it will completely destroy a phone, and sometimes it won't. However you also have the chance of the iPhone working perfectly fine, bar one functionality.

I have personally seen this a few times and yes, it does suck, however if you have already replaced the dock connector and the digitiser yet still no luck, then the logic board has probably been damaged and you will need to replace the entire unit. :(

Hope this helps,

Martin

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

piet 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 527