My blender keeps saying overload when it isn't?
For my smoothie, my blender says overload when it's the same amount as always. How come? Do I need to mail it in for repair?
좋은 질문 입니까?
점수
0
85845
답변 4개
가장 유용한 답변
평판: 685.3k
3.4k
1.1k
2.6k
Your machine has a three warranty, so if it's still covered I would contact Blendtec for warranty repair. Here's their website: http://www.blendtec.com/?gclid=CI-zi-_3r... or Contact
800-BLENDTEC
801-222-0888
Fax: 801-802-8584
M-F 8:00am to 5:30pm Mountain Standard Time
해당 답변은 도움이 되었습니까?
점수
2
평판: 13
3
Hi, the problem is in the blenders rotor, it has a short and should be replaced.
해당 답변은 도움이 되었습니까?
점수
1
I just had this Overload error start up this morning. Took it apart and recorded the repair:
해당 답변은 도움이 되었습니까?
점수
0
No, You sir did NOT have "overload" error on the blender in that video.
Loose fan has nothing to do with the "overload" message, but the YouTube video you've made could help in selling your other blender on eBay, the one with burned motor and the "overload" message.
This is pathetic...
Overload 10892 = Replace the Carbon Brush of the engine
