What part goes first?

Question

iMac G3

Apple Inc.에서 (예전 Apple Computer, Inc.) 제작한 iMac 개인용 컴퓨터 라인의 첫 번째 모델은 1998년에서 2003년 사이에 제작되었습니다.

92 질문 전체 보기

Nick @nick

평판: 88.7k

193

260

144

게시일: 2012년 4월 25일

옵션

What part goes first?

I have my old dumpster iMac G3 here with some issues i am looking into

The speakers are shot, but I will not bother, read on why not.

This computer has pink and green color bands where theyshould not be, but I don't worry too much, propably because I maximize the useable screen on it

The main issue is that this computer has a tendency to give a yellow colro issue all over the monitor, but it can still be used, the easiest(and safest) way to fix is to give the back a firm, but gentle slap to fix(i know as a tech not to do this, but i care about my life and will not use a CRT as a suicide tool by accident)

i have hard it's the downconverter, analog board, or CRT, sometimes all 3

Anyone know better about these computers having this failure and the dying part? I know how to take it all apart, I just refuse to, I'll pull the logicboard and downconverter from the bottom, along with the other parts, but this is it!

I'll do the downconverter, but that is it

casing cracked pretty bad, and ripping this apart turned into a crubling mess, but i got the CRT out, and the analog board, for a non cracking case one, if i keep the analog board

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

선택된 답변

mayer @mayer

평판: 685.2k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2012년 4월 25일

옵션

If a slap fixes it, go over the CRT board and touch up all the "cold solder joints", that will probably fix it. This would repair 75% of all CRT monitors that I've had to work on. http://www.polkaudio.com/forums/showthre... http://en.wikipedia.org/wiki/Soldering

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 6개:

I should add the plastic that holds the CRT in is cracking, from sitting by outside heat, not slapping, i slap just hard enough to cause it to work and that's it, and only when it is bad, and a screw post broke out of place, due to weight of the monitor

Nick 의 2012년 4월 25일

CRTs are dangerous to DIYers - take care.

originalmachead 의 2012년 4월 26일

I am not 100% sure if i want to try it just yet..... as i said in a comical way at first, i am not using a CRT as a suicide tool if i get shocked, in a serious way, if i do, this will not be rushed if i bother to try

Nick 의 2012년 4월 27일

The shock could be very serious - deadly in fact.

originalmachead 의 2012년 4월 27일

so it's best I get a new PPC mac?

Nick 의 2012년 4월 27일

댓글 1개 더보기

댓글 달기

I should add the plastic that holds the CRT in is cracking, from sitting by outside heat, not slapping, i slap just hard enough to cause it to work and that's it, and only when it is bad, and a screw post broke out of place, due to weight of the monitor — Nick
I am not 100% sure if i want to try it just yet..... as i said in a comical way at first, i am not using a CRT as a suicide tool if i get shocked, in a serious way, if i do, this will not be rushed if i bother to try — Nick

iMac G3

What part goes first?

update

답변 1개

귀하의 답변을 추가하세요