주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

294 질문 전체 보기

How to fix a sunk in power button

So, my iPhone4 was perfectly fine until a couple weeks ago. I took it out of my pocket and I discovered that the power button had "sunk" in. It still functions; however, there is no click or resistance when I press it down. I have to push a lot harder in order for it to properly work. I have take then entire phone apart in order to attempt a fix, but I cant figure it out. The power sensor cable seemed perfectly fine (the yellow 'nub' was still intact). Any suggestions on what I can do to restore the original function and regain the clicking?

Any help would be greatly appreciated.

also, theres no water damage nor has the phone been dropped.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 1개

가장 유용한 답변

Unfortunately that is a common problem on the iphone 4.

The problem is that originally there is a small black 'dot of plastic' on top of the switch (on the flex) which activates the switch when you press.

Most likely this black dot has disappeared from your switch. The best way to solve this is to replace the power and sensor flex assembly:

[연계 제품이 누락 또는 비활성화 됨: IF189-004-1]

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

귀하의 답변을 추가하세요

Christian 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 23,292