주요 콘텐츠로 건너뛰기

모델 A1200 with 2.16 또는 2.33 GHz Core 2 Duo 프로세서

112 질문 전체 보기

Mac doesn't recognize HD.

At the beginning the mac started to slow down so I decided to reinstall the OS, when I did it kept running slow so I did it again. when it started up a question mark appeared on the screen, I looked on the internet and said the HD was broken so I changed it for another one that I had at home. when I turn on the mac the question mark appeared again. so I inserted the installation dvd, the dvd runs but when I have to chose the destination HD theres no HD to chose from.

now, is the HD that I installed broken? or could it be another problem.

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

What was the full name of the replacement hard drive and what is it's history?

댓글 달기

답변 2개

선택된 답변

Sorry, I though Josh was going to answer this. You have to Boot from your system installation disk, go to the second page pull down menu to Utilities -> Disk Utility and format the drive before trying to install a system on it.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

good answer +

댓글 달기

I've never worked with one of these iMacs, but here's my suggestion:

Could it be that the harddrive needs jumpers? I had an old PowerMac G3 that would exhibit the exact same symptoms as your iMac. I was able to fix it by setting the jumpers correctly.

If the above does not help, just sit tight a couple minutes- Mayer will be along to save the day! He's pretty good with diagnosing internal problems.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

No jumpers needed on a SATA in Macs ;-)

Haha, my bad. I've never dealt with SATA.

Should I delete my answer since it's not helpful?

댓글 달기

귀하의 답변을 추가하세요

Fernando Garcia 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,827