주요 콘텐츠로 건너뛰기

2008년 10월 출시 / 2.4, 2.53, 2.66, 2.8 또는 2.93 GHz Core 2 Duo 프로세서

376 질문 전체 보기

MacBook aluminium Random freezing problem

Hello, I bought my friend's Macbook aluminium (2008) it orginally had a 250gb HD installed but he wanted to keep it. I therefore installed my 80gb HD from my old white macbook - however at times when i start it up the macbook freezes upon the login screen where i have to manually power it off (this also freezes happens once i close the lid).

I have turned off the safe sleep mode via command- Is it a problem that i have installed a much smaller HD than what it orignally had? Also why does the computer freeze when i close the lid even though i have set hibernate to 0?

It is running of 2gb of RAM but even running safari at times takes a while to load. Apparently the macbook had no problems at all before the HD swap.

Any adivce would be much appreciated,

Thanks Michael

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

my macbook is MacBook Unibody Model A1278, 2.4ghz

댓글 달기

답변 1개

선택된 답변

Try re-formating the drive using the "write zeros" option to map out any bad blocks. Reinstall the system from the system disk that came with his machine or a retail 10.6 disk. If you have neither, call Apple and buy an original installation disk for this machine. It will cost $16 plus tax and shipping. You'll need the serial number.

해당 답변은 도움이 되었습니까?

점수 3

댓글 2개:

So it is not the case of anything being broke? What can i do with regards to my macbook freezing after reopening the lid, will formatting via 'Write zeros' solve that?

Thanks for the help

I don't know. My approach is to fix what I know can be fixed and then address remaining issues.

댓글 달기

귀하의 답변을 추가하세요

Michael 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,432