물건을 수리하세요 커뮤니티 상점

Repair guides, disassembly, and troubleshooting information for the first generation Sony PlayStation 5 DualSense controller, successor to the DualShock series. Identified by model number CFI-ZCT1W and motherboard model BDM-010.

20 질문 전체 보기 | 8 부품 둘러보기

옵션

Controller's board is flashing yellow 3 times when connected to power

Hello! Newbie here, I tried to replace the analog sticks on my PS5 controller as it had stick drift. After a long ride, I finally got the new modules installed and soldered to the board. I wanted to check if it still works and plugged the battery in. The LED on the front flashed 3 times in yellow color. There is another similar question here and, people are saying it is a short circuit. Is this board dead? Or can I do something to fix this issue?
Thank you!

Block Image


Block Image


이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터 기준:
가장 유용함 가장 최근 가장 오래된

옵션

Hello Paul, did you put the controller fully back together when you tried to test to see if it still works? The 3 flashes in the yellow color can mean different things.
1st answer- 3 yellow/amber led flashes- The controller is going into rest mode it’s disconnected or the PS5 has entered sleep mode.
2nd answer- Controller can’t connect — could be low battery, no Bluetooth sync, or firmware crash.

could you provide me some more details please.

이 답변이 도움이 되었나요?

예 아니요
점수 0

댓글 3개:

I didn't fully put it back together, just plugged the battery in the board and then connected it to my laptop via usb c to check the calibration tool. It is not showing up on my pc, it did show up prior to changing the analog modules.

의

There's your problem!

• The battery provides power, so the microcontroller wakes up.

• It quickly performs a self-check.

• When it sees missing connections (like the USB board, touchpad ribbon, or trigger lines), it flashes yellow 3 times and shuts down to protect itself.

Go ahead and put it fully back together and then test it.

Get back to me if it works

의

@carsons45505 Thank you! This didn't work for me, in the end I desoldered it and soldered everything again. Now it works like a charm, appreciate your help!

의

댓글 달기

답변을 추가하세요

Paul Clodnischi 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 11

지난 7일: 27

지난 30일: 152

전체 시간: 279