주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기
질문 마감됨

Why is my digitiser uncalibrated after replacing it?

Iphone 3gs 16gb.

I replaced the digitiser and front glass (1 piece) put it back together, it detects my touches so is working, but thinks I am tapping about 1cm to the left of where I actually am tapping. Is there a way to calibrate the touchscreen like on many phones or have I done something wrong? I know this is a known issue, but there doesn't seem to be any up to date information or definite answer :( any help would be very appreciated as I'm doing it for a friend and I can't imagine them being 100% happy with this fix as only the outer glass was broken when they gave me the phone! thanks, max

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

You either have a faulty digitizer or, more likely....

You have a faulty mainboard connector. The first iPhone I ever looked at was this way, and I needed to have the iPhone looked at. It ended up being that the connector could not be fixed to resolve the issue. Again, you are looking at a bad mainboard digitizer connector (#2). It may be fixable, but it may not be.

Best of Luck,

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

having same problem did you need a new glass?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 627