주요 콘텐츠로 건너뛰기

First generation Apple iPad with Wi-Fi, available with 16, 32, or 64 GB. Model Number A1219. Repairs are straightforward and do not require heat.

142 질문 전체 보기

Why does my iPad randomly think there are headphones plugged in?

Ok so before I close it up I should investigate this.

I get no sound from the iPad because it seems it thinks I have headphones plugged it. The socket looks clear, nothing broken off in there, when I remove the ribbon cable, no change. But when I plug the ribbon cable back in, sound comes back for a few minutes then.. Presto. It thinks I have headphones plugged in again!

What can I do to resolve this?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

I just pushed down on the cable about half way up and the problem went away so I'm inclined to agree. It does move the socket too though so I hope they didn't try to flip up the wrong side of the connector..

Mystery solved though, let's see what fixes it permanently.

Thanks!

의 답변

의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

2개의 답변

선택된 해법

Replace your headphone jack flex.

Regards,

Tough Gaming Technical Support

Agent Elisha

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Hello, I had this same problem. I basically opened my ipad unclipped the headphone ribbon cable, put it back in and presto Ipad was funtioning correctly, it simply needed some sort of reset. Warning be careful and take your time removing the screen. Those mid frame clips that hold screen in will break but they are super easy to replace, and the digitizer, lcd, and wifi cable (s) are connected to motherboard. So be careful, hope this helps.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Joel 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 8

전체 시간: 8,854