Changed antenna and now display is only grey

Question

iPhone 3GS

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

질문 마감됨

Scali @scali98505

평판: 9

2

3

게시일: 2012년 7월 1일

옵션

Changed antenna and now display is only grey

hi, I changed my antenna and now my display is only grey.... the phone itself works because when I charge it I can hear that I put the charging cable in.....

I think I don't have damaged anything because I often open an iphone...

Does anybody know which problem it could be??

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

I checked everything and all is fine... I put it into dfu mode and restored it and now the display is white, once it had a lot of coloured stripes, but now its only white.... Is it the diplay or any other problem??

And can I make sure that the iphone is OFF, without display?

Best regards

Scali 의 2012년 7월 2일

댓글 달기

답변 1개

I checked everything and all is fine... I put it into dfu mode and restored it and now the display is white, once it had a lot of coloured stripes, but now its only white.... Is it the diplay or any other problem??

And can I make sure that the iphone is OFF, without display?

Best regards — Scali

hectordtruong @hectordtruong 평판: 7.4k 15 5 10 · Answer 1 · 2012-07-01T20:26:20-07:00

가장 유용한 답변

hectordtruong @hectordtruong

평판: 7.4k

15

5

10

게시일: 2012년 7월 1일

옵션

If the display is grey, then you put the LCD connector on wrong, or damaged the LCD. Open it up again and check the connectors, make sure the connector clicks in. Make sure the phone is OFF when doing so.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기