기기를 수리하세요 커뮤니티 상점

모델 A1369, 1.6, 1.7, or 1.8 GHz 프로세서, 64, 128 또는 256GB 플래시 저장공간

328 질문 전체 보기

옵션

Add a MBP Glass Display Bezel

I recently purchased a MBA Mid-2011 Model and was interested in the possibility of replacing (if required?) the aluminum display bezel with the MBP Glass Display Bezel (black border, glass cover).

I believe the dimensions are identical for the 13" models.

Would it be as simple as attaching the replacement bezel over the stock MBA, or are there tolerance concerns with the additional thickness when closed?

If not, is it possible to remove the aluminum bezel without removing the display from the body?

Any thoughts will be greatly appreciated...lets make a hybrid MBAP!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

The MBA display bezels are glued on to the frame. You would have an extremely hard time removing it without breaking the LCD. I don't recommend this at all.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I have since seen a how-to video for removing the MBA bezel....it looked difficult. They used a heat gun and a razor blade and were not very clean about it! I am not entirely sure the MBP glass bezel could be attached over the MBA bezel due to the added thickness. The rubber gasket around the bezel determines the thickness, it there is very little room with the bezel in place.

의

댓글 달기
가장 유용한 답변

옵션

I also saw the video and tried to remove the MBA bezel, I used this heat gun: ATTEN AT8586 (which is very cheap 90USD) at a temperature of 140-180*C, and I used a plastic blade. You need to pay attention to the lcd but with the heat it was quite easy to remove the bezel.

However I was replacing the lcd so I didn't pay attention on it while opening the bezel.The screen is extremely fragile so try not to use a metal blade.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Gavin McMorrow 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 2,123