주요 콘텐츠로 건너뛰기

Hewlett-Packard began manufacturing personal laptop computers in 1993.

2187 질문 전체 보기
질문 마감됨

Hp dv6 1308EL stuck on HP Invent screen

Hi all,

I've had a problem with my notebook.

I've unmounted it to change the thermal paste on CPU and GPU, and now when I power it it gets stuck at the HP Invent screen for a loong time.

How can I fix it?

I've tried to change the thermal paste again, and it was ok.

I've resetted the CMOS

I've tried separately the two RAM cards

I've tried to boot it without the hdd

BUT nothing happened..

Even the BIOS screen, when I manage to get to it, it's veery slow, I can barely navigate in it..I've resetted the Bios settings, but still nothing..

Help me please, I'm going crazy!

And I forgot to tell that the first time I booted it, it worked fine and I used it for a few hours and it was going just fine!

After I restarted it, with no updates, it didn't boot anymore..

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

Slow BIOS navigation? Check that thermal paste again, sounds like overheating. If you are not sure what good thermal paste connection should look like, put some on a flat piece of metal, and smush it with another piece of metal. Also, check to make sure that your Heatsink os properly vented, and that dust particles are not blockin the airflow.

Best of Luck,

Tough Gaming Technical Support

Agent Elisha

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 734