주요 콘텐츠로 건너뛰기

Nokia E90 is a 3G smartphone made by Nokia and the latest model of the Communicator series.

6 질문 전체 보기

Can I get a board connector

while removing the strip from the board .. i broke one of the connector which connects the strip to the board ... how can i fix it .... or i have to place a new connector ..

and where can i get a connector too.. :-(

my model is nokia e90

there are two similar connectors at the side of the logic board .. near the camera ... i think it comes from the display ..

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 7개

There are a few connectors on the logic board? Which one did you break?

there are two similar connectors at the side of the logic board .. near the camera ... i think it comes from the display

i have uploaded a image of it ..

Where did you place the images :)?

now i have placed it ... can u see it :-)

댓글 2개 더보기

댓글 달기

답변 1개

선택된 답변

chaman, that is a Coax connector. Listed as X4500 in the schematic. The Nokia part number is 5429117 N-SERIES CONN COAX 30POL F VERTICAL 50V 0.3A P0.4 It is also used in the N93i. Of course, it is solder on the logic board and will require some pretty good soldering skills. The only places I could find are in Europe, one being in Finland. You may want to do a Google search. Hope this helps, good luck.

Block Image

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

ya but its very difficult to find it in india ,, i am not going to do the soldering thing .. it would be done by the my mobile repairer .. and i dont know how to get the connector ...

chamann, there is one here and another one here and here is one from Finland. All you have to do is go online and purchase one and I am not sure how I can help you with that. I can't seem to find one in India, but you may have better luck.

댓글 달기

귀하의 답변을 추가하세요

chaman 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 1,512