주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

424 질문 전체 보기

Where do I clean if I got finger oil on my parts?

I had my iPhone into a shop for repairing when my power button failed. After I got it back, I have very bad bluetooth reception and almost non-existent WiFi. I remember that the shop did not use gloves. I took it back there and they are denying all responsibility.

So I assume that there's probably some finger oil on various parts and I've seen all of the suggestions on here about cleaning "all contacts" with a degreaser or Windex. But I don't know what "all contacts" are. Can someone help me out and point them out?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

Any help?

의 답변

Thanks, Brett. I didn't check this until after I left work so I will try on Monday when I have access to my Pentalobe screwdriver.

의 답변

의견 추가하세요

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

지금 장보기

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

지금 장보기

1개의 답변

가장 유용한 답변

Hey Snowdog,

This is a pretty common problem, and you're correct about the finger oil causing bluetooth to fail.

There are a couple places that you should clean the contacts before re-assembly. While many of connectors in the iPhone use plug-and-socket connections, many just use spring pressure contacts. These pressure contacts are those which you should clean off. Here are a few:

Use some isopropyl alcohol or some Windex on a Q-tip or microfiber cloth, and you should be golden.

Good luck, and let us know how it turns out.

iPhone 4 Power & Lock Button 이미지

안내서

iPhone 4 Power & Lock Button Replacement

난이도:

어려움

15 - 30 minutes

iPhone 4 Verizon Power Button 이미지

안내서

iPhone 4 Verizon Power Button Replacement

난이도:

어려움

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

snowdog850 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,556