주요 콘텐츠로 건너뛰기

모델 A1046 또는 A1095 / 1280x854 스크린 해상도

118 질문 전체 보기

How to connect keyboard to logic board

I recently had to replace the dc board on my 1.5 GHz (model A1095) machine, and upon reassembly could not hook the keyboard cable to the logic board. I even went so far as to purchase a new keyboard thinking that perhaps I damaged the original one while taking the computer apart. I can not get either one to work, even when I try to hold it in place and boot the computer. It feels like it is not sliding all the way in, but I have never dealt with this before, so i do not know how far in the cable should go. Any help would be appreciated.

Thanks, Charl

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

선택된 답변

Did you push the locking tab back in when you put the cable in? I have removed and re-attached a keyboard for a 17" PBG4, but never the 15" aluminum.

해당 답변은 도움이 되었습니까?

점수 3

댓글 3개:

To be honest, I did not even know there was a locking tab involved when I removed it. I pulled on the cable, rather firmly, and it came out. I just took a look at it, where would the tab or tabs be located. Perhaps they are still in the locked position

The socket has a tab that goes around the cable, here is the diagram on ifixit as to how these work: http://s1.guide-images.ifixit.com/igi/1M...

Nice save +

댓글 달기

Thanks, that's it.

Charl

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Glad to help.

댓글 달기

귀하의 답변을 추가하세요

Charl 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,185