์ฃผ์š” ์ฝ˜ํ…์ธ ๋กœ ๊ฑด๋„ˆ๋›ฐ๊ธฐ

ํ•„์š”ํ•œ ๊ฒƒ

ํ•ด๋‹น ๋ถ„ํ•ด๋„๋Š” ์ˆ˜๋ฆฌ ์•ˆ๋‚ด์„œ๊ฐ€ ์•„๋‹™๋‹ˆ๋‹ค. Sony SRS-X3 ์ˆ˜๋ฆฌ๋Š” ์ €ํฌ ์„œ๋น„์Šค ์„ค๋ช…์„œ๋ฅผ ์‚ฌ์šฉํ•˜์‹ญ์‹œ์˜ค.

  1. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown, Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 1 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/2 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown, Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 1 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/2
    • There are 6 screws under the rubber feet on the bottom. Removing them allows the bottom plate to be removed, and then from there, the front panel, front cover, and battery compartment.

    • if you need higher reslution photos please leave a comment.

  2. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 2 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/3 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 2 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/3 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 2 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 3/3
    • Photos of the Main PCB. IC part numbers can be read off the photos.

    • DC to DC power supply and Yamaha audio amp chip/output filter inductors are the main parts of this side

  3. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 3 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/3 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 3 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/3 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 3 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 3/3
    • More images of the main board assembly.

    • The pinouts of the main flex are actually stated on the board which is a huge plus.

    • A CSR Bluetooth SoC and MXIC flash are provided.

  4. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 4 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/2 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 4 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/2
    • The battery pack is on a connector and can be removed before all of this is taken out.

    • Battery is a 2 cell 18650 pack with protection built in; 7.4V

  5. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 5 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/2 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 5 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/2
    • Two 7W speakers with strong magnets are included in this speaker; it is marketed with a 20W power output. Excursion is about 7-10mm at its peak.

  6. Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 6 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 1/2 Sony SRS-X3 Bluetooth NFC Wireless Speaker Teardown: 6 ๋‹จ๊ณ„, ์ด๋ฏธ์ง€ 2/2
    • Two passive radiators are present inside the device. They're fairly heavy but rubberized, and they resonate and are tuned for low frequency reproduction. These move a LOT when it's playing. 7-10mm per side.

Larry Chen

ํšŒ์› ๊ฐ€์ž…์ผ: 04/22/13

913 ํ‰ํŒ

์•ˆ๋‚ด์„œ 5๊ฐœ ์ž‘์„ฑํ•˜์˜€์Šต๋‹ˆ๋‹ค

๋Œ“๊ธ€ 10๊ฐœ

This is great, thank you Larry. I'd wondered about the possibility of upgrading the battery to one that lasts longer between charges but I had no idea how to open the case. It didn't occur to me that the screws would be under the rubber feet!

Steve MacDonald - ๋‹ต๊ธ€

Dear Larry, can you give me capture specific card power close to battery. Because i got resistor blown in that card, and i don't know specific value of this resistor. Many Thanks in advance

didi - ๋‹ต๊ธ€

One speaker started to give a lot of distortion making it unusable. Repositioned speaker in the heavy (magnet) housing and it's all good again.

Thank you for the opening tips and pics!

Albert - ๋‹ต๊ธ€

Larry,

My mini connector for dc into the board has broken. Replace connector or the whole Board? Where can I get a Power Board?

michael ruse - ๋‹ต๊ธ€

Where could I find the replacement speaker? My right speaker is buzzing a little on certain songs. Thanks!

Aaron Todd - ๋‹ต๊ธ€

๋Œ“๊ธ€ ์“ฐ๊ธฐ

์กฐํšŒ ํ†ต๊ณ„:

24 ์‹œ๊ฐ„ ์ „: 1

7์ผ ์ „: 9

30์ผ ์ „: 35

์ „์ฒด ์‹œ๊ฐ„: 8,522