주요 콘텐츠로 건너뛰기
전체 문서를 보려면 로그인하세요
8 페이지 · 1.79 mb · PDF
로그인
Ⅵ . SERVICE INFORMATION
■ Disassembling the Camera
- Remove the 2 screws.
- Remove the 2 screws.
- Remove the 2 screws.
Ⅵ . SERVICE INFORMATION
- Separate the Belt Pin.
- Separate the Top Cover.
- Remove the 2 screws.
Ⅵ . SERVICE INFORMATION
- Remove the 2 screws.
- 1> Disconnect the Barrel Assy. PCB from the connector and remove the three screws on the CCD Assy.
- 2> Remove the two screws on the main PCB Assy.
- 3> Remove the soldering on connector 2 of the battery armature.
- Separate the LCD Assy plate.
15. Remove the 2 screws.
Ⅵ . SERVICE INFORMATION
- Remove the screw.
18. Separate the barrel Assy.
