기기를 수리하세요 커뮤니티 상점

Mac Mini Late 2014 Logic Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prerequisite only.

필요한 것

  1. Mac Mini Late 2014 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 1/1

    • Remove the 2.6 mm T6 screw securing the SATA cable connector bracket.

    번역하기

  2. Mac Mini Late 2014 Logic Board Assembly Replacement: 2 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 2 단계, 이미지 2/2

    • Remove the SATA cable connector bracket.

    번역하기

  3. Mac Mini Late 2014 Logic Board Assembly Replacement: 3 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 3 단계, 이미지 2/2

    • Use the flat end of a spudger to lift the SATA cable connector up off of its socket on the logic board.

    번역하기

  4. Mac Mini Late 2014 Logic Board Assembly Replacement: 4 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 4 단계, 이미지 2/2

    • Use the tip of a spudger to disconnect the IR sensor cable connector by prying it straight up from its socket.

    번역하기

  6. Mac Mini Late 2014 Logic Board Assembly Replacement: 5 단계, 이미지 1/1

    • The following three steps only apply to Mac minis equipped with a PCIe SSD. Skip the next three steps if your Mac mini only has a hard drive.

    • Remove the two 2.6 mm T6 screws securing the PCIe SSD cable bracket.

    번역하기

  7. Mac Mini Late 2014 Logic Board Assembly Replacement: 6 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 6 단계, 이미지 2/2

    • Remove the PCIe SSD cable bracket.

    번역하기

  8. Mac Mini Late 2014 Logic Board Assembly Replacement: 7 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 7 단계, 이미지 2/2

    • Lift the PCIe SSD connector up off its socket.

    번역하기

  9. Mac Mini Late 2014 Logic Board Assembly Replacement: 8 단계, 이미지 1/1

    • Remove the single 16 mm T6 screw securing the logic board.

    번역하기

  10. Mac Mini Late 2014 Logic Board Assembly Replacement: 9 단계, 이미지 1/1
    이 단계에 사용된 도구:
    Mac mini Logic Board Removal Tool
    $4.99
    구매

    • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

    • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure the rods make contact with the case under the logic board before proceeding.

    번역하기

  11. Mac Mini Late 2014 Logic Board Assembly Replacement: 10 단계, 이미지 1/3 Mac Mini Late 2014 Logic Board Assembly Replacement: 10 단계, 이미지 2/3 Mac Mini Late 2014 Logic Board Assembly Replacement: 10 단계, 이미지 3/3

    • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

    • Cease prying when the removal tool makes contact with the opening in the rear case.

    • Remove the Mac mini Logic Board Removal tool.

    번역하기

  12. Mac Mini Late 2014 Logic Board Assembly Replacement: 11 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 11 단계, 이미지 2/2

    • Pull the DC-In cable connector straight out of its socket on the logic board.

    번역하기

  13. Mac Mini Late 2014 Logic Board Assembly Replacement: 12 단계, 이미지 1/2 Mac Mini Late 2014 Logic Board Assembly Replacement: 12 단계, 이미지 2/2

    • Carefully slide the logic board assembly out of the Mac mini, minding any cables that may get caught.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Sam Goldheart

회원 가입일: 10/18/12

465,744 평판

안내서 538개 작성하였습니다

배지: 48

배지 +45개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,767개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 566