기기를 수리하세요 커뮤니티 상점

1967-68 Mustang Kick Panel Speaker Replacement

소개

Most people aren't happy when a speaker blows out in their car. Old cars can be intimidating because working on them may be difficult at times. This is the perfect Fast Fix guide for anyone who has that problem with their classic Mustang.

필요한 것

  1. 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: 1 단계, 이미지 1/2 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: 1 단계, 이미지 2/2

    • Find the car battery under the hood.

    • On the battery locate the black negative battery terminal.

    • Next unscrew the knob on the disconnect.

    • Lastly move the negative lead away from the batter terminal.

    • Make sure not to cross the battery leads.

    번역하기

  2. 1967-68 Mustang Kick Panel Speaker Replacement: 2 단계, 이미지 1/1

    • Locate the kick panel speaker that needs to be replaced.

    번역하기

  3. 1967-68 Mustang Kick Panel Speaker Replacement: 3 단계, 이미지 1/1

    • Locate the two top screws as well as the two bottom screws for the speaker.

    • Check the kind of screws that were used to hold the speaker in place.

    번역하기

  4. 1967-68 Mustang Kick Panel Speaker Replacement: 4 단계, 이미지 1/3 1967-68 Mustang Kick Panel Speaker Replacement: 4 단계, 이미지 2/3 1967-68 Mustang Kick Panel Speaker Replacement: 4 단계, 이미지 3/3

    • You are now ready to start replacing the speaker.

    • A philips head screwdriver will be needed.

    • Do not use a socket in this situation because it may mess up the speaker guard.

    • Lastly make sure to remove the screw completely without stripping out the screw hole.

    번역하기

  6. 1967-68 Mustang Kick Panel Speaker Replacement: 5 단계, 이미지 1/3 1967-68 Mustang Kick Panel Speaker Replacement: 5 단계, 이미지 2/3 1967-68 Mustang Kick Panel Speaker Replacement: 5 단계, 이미지 3/3

    • The speaker guard and speaker are now ready to be removed.

    • Be careful when removing the speaker. Do not pull the wires tight.

    번역하기

  7. 1967-68 Mustang Kick Panel Speaker Replacement: 6 단계, 이미지 1/2 1967-68 Mustang Kick Panel Speaker Replacement: 6 단계, 이미지 2/2

    • Locate the wires on the back of the broken speaker.

    • Remove both the positive and negative wires.

    번역하기

  8. 1967-68 Mustang Kick Panel Speaker Replacement: 7 단계, 이미지 1/2 1967-68 Mustang Kick Panel Speaker Replacement: 7 단계, 이미지 2/2

    • Now locate the new speaker.

    • Slide the positive and negative wires onto the speaker terminals.

    번역하기

  9. 1967-68 Mustang Kick Panel Speaker Replacement: 8 단계, 이미지 1/3 1967-68 Mustang Kick Panel Speaker Replacement: 8 단계, 이미지 2/3 1967-68 Mustang Kick Panel Speaker Replacement: 8 단계, 이미지 3/3

    • Place the speaker back into the kick panel housing.

    • Line up the speaker holes with the existing holes in the kick panel.

    • Be careful not to pinch the speaker wires.

    • This would be a good time to replace the speaker wires if needed

    번역하기

  10. 1967-68 Mustang Kick Panel Speaker Replacement: 9 단계, 이미지 1/2 1967-68 Mustang Kick Panel Speaker Replacement: 9 단계, 이미지 2/2

    • Place the speaker guard back over the speaker.

    • Screw in all four screws

    • Do not over tighten the screws or the holes will strip out.

    번역하기

  11. 1967-68 Mustang Kick Panel Speaker Replacement: 10 단계, 이미지 1/2 1967-68 Mustang Kick Panel Speaker Replacement: 10 단계, 이미지 2/2

    • Reconnect the negative battery terminal.

    • Screw the knob until it is snug.

    번역하기
결론

You have now replaced the speaker.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

John

회원 가입일: 09/29/15

101 평판

안내서 1개 작성함

배지: 3

팀

Cal Poly, Team 15-7, Green Fall 2015 Cal Poly, Team 15-7, Green Fall 2015 회원

CPSU-GREEN-F15S15G7

3 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 24

전체 시간: 1,659